ACCESSORIES Archives - Satchell Engineering https://www.satchellengineering.co.uk/product-category/competition-gearboxes/accessories/ Custom Motorsport Component Fabrication Thu, 05 Jun 2025 15:11:40 +0000 en-GB hourly 1 https://www.satchellengineering.co.uk/wp-content/uploads/2022/02/cropped-web-fav-icon-1-32x32.png ACCESSORIES Archives - Satchell Engineering https://www.satchellengineering.co.uk/product-category/competition-gearboxes/accessories/ 32 32 7/8×20 clutch alignment tool https://www.satchellengineering.co.uk/product/7-8-x-20-clutch-alignment-tool/ Thu, 11 Jan 2024 16:08:02 +0000 https://www.satchellengineering.co.uk/?post_type=product&p=5725 7/8x20 clutch alignment tool, made from machined steel.

The post 7/8×20 clutch alignment tool appeared first on Satchell Engineering.

]]> 7/8×20 (22.3mmx20) clutch alignment tool, particularly useful for aligning twin plate clutches when used with our Peugeot BE and Ford IB5 dog gear kits.

The post 7/8×20 clutch alignment tool appeared first on Satchell Engineering.

]]> BE4/BE4R clutch cable kit https://www.satchellengineering.co.uk/product/be4-be4r-clutch-cable-kit/ Thu, 23 Nov 2023 11:23:23 +0000 https://www.satchellengineering.co.uk/?post_type=product&p=5655 Rocker clutch kit to allow the retention of the OEM MA clutch cable with the BE4R gearbox upgrade in the 106/Saxo.

Fully adjustable for leverage and travel.

Suitable for all options of clutch from OE through to full race 7.25 inch lug drive kits.

Can be adjusted to give the light 'OE' feel to even the heaviest of sprung covers.

This kit could also be used in a variety of other installations, for example in a Peugeot 205 when fitting the EW engine with BE4 gearbox etc

The post BE4/BE4R clutch cable kit appeared first on Satchell Engineering.

]]> Rocker clutch kit to allow the retention of the OEM MA clutch cable with the BE4R gearbox upgrade in the 106/Saxo.

Fully adjustable for leverage and travel.

Suitable for all options of clutch from OE through to full race 7.25 inch lug drive kits.

Can be adjusted to give the light ‘OE’ feel to even the heaviest of sprung covers.

This kit could also be used in a variety of other installations, for example in a Peugeot 205 when fitting the EW engine with BE4 gearbox etc

PLEASE NOTE, the kit is designed to operate using the OE BE4R hydraulic clutch arm. If your gearbox has the cable arm this will need changing for the hydraulic arm to use this kit.

The post BE4/BE4R clutch cable kit appeared first on Satchell Engineering.

]]> 108mm diameter inner Lobro joint https://www.satchellengineering.co.uk/product/108-lobro/ Tue, 14 Dec 2021 16:20:36 +0000 http://satchell.creativetheorylab.co.uk/?product=108mm-diameter-inner-lobro-joint 108mm FAG lobro joint to suit the Beckert sequential drive flange.

The post 108mm diameter inner Lobro joint appeared first on Satchell Engineering.

]]> 108mm FAG lobro joint to suit the Beckert sequential drive flange.

The post 108mm diameter inner Lobro joint appeared first on Satchell Engineering.

]]> 100mm diameter inner Lobro joint https://www.satchellengineering.co.uk/product/100-lobro/ Thu, 09 Dec 2021 17:30:04 +0000 http://satchell.creativetheorylab.co.uk/?product=100mm-diameter-inner-lobro-joint 100mm SKF lobro joint to suit the Beckert sequential drive flange.

The post 100mm diameter inner Lobro joint appeared first on Satchell Engineering.

]]> 100mm SKF lobro joint to suit the Beckert sequential drive flange.

The post 100mm diameter inner Lobro joint appeared first on Satchell Engineering.

]]> FWD sequential RH (long) drive flange https://www.satchellengineering.co.uk/product/drive-flange-long/ Thu, 09 Dec 2021 17:16:34 +0000 http://satchell.creativetheorylab.co.uk/?product=fwd-sequential-rh-long-drive-flange Short side output drive flanges to suit the Beckert FWD sequential

The post FWD sequential RH (long) drive flange appeared first on Satchell Engineering.

]]> Long side output drive flange to suit both the 5 and 6 speed Beckert FWD sequential

Please specify 100mm or 108mm diameter lobo fitment when ordering.

The post FWD sequential RH (long) drive flange appeared first on Satchell Engineering.

]]> FWD sequential LH (short) drive flange https://www.satchellengineering.co.uk/product/drive-flange/ Thu, 09 Dec 2021 17:09:08 +0000 http://satchell.creativetheorylab.co.uk/?product=fwd-sequential-lh-short-drive-flange Short side output drive flanges to suit the Beckert FWD sequential

The post FWD sequential LH (short) drive flange appeared first on Satchell Engineering.

]]> Short side output drive flange to suit both the 5 and 6 speed Beckert FWD sequential

Please specify 100mm or 108mm diameter lobo fitment when ordering.

The post FWD sequential LH (short) drive flange appeared first on Satchell Engineering.

]]> TTV clutch plate -1”x23 for sequential https://www.satchellengineering.co.uk/product/ttv-twin-1/ Fri, 28 Feb 2020 15:02:23 +0000 http://satchell.creativetheorylab.co.uk/?product=ttv-clutch-plate-1x23-for-sequential TTV clutch plate

The post TTV clutch plate -1”x23 for sequential appeared first on Satchell Engineering.

]]> TTV clutch plate to suit the 1” x 23 spline on the Beckert sequential.

The post TTV clutch plate -1”x23 for sequential appeared first on Satchell Engineering.

]]>