Description
CONTACT US TO BUY THIS
A fully spherical jointed front suspension kit to fit the 306. This kit has a strengthened and refurbished subframe along with re-positioned rear compression strut clevises to aid strength. The wishbones are fabricated from CDS tube and are designed with race and rally in mind.
We use refurbished 406 hubs along with new bearings so your original strut body will fit. We can supply coilover type 40mm inverted type strut bodies along with spring platforms and C-spanners at extra cost.
The 406 hubs have revised rollcentre and bump steer correction via rod end spacers.
The track rod ends are spherical jointed with the supplied adaption tubes.
Caster and camber is adjustable.
Available in a choice of track widths, including full Maxi width.
Please note –
– The brake offset is slightly different from OE 306 on the 406 hub, it will be necessary to make some adjustments to your brake fitment.
– There is no provision to run the front ARB with this set-up.
THE FRONT SUBFRAME IS SUPPLIED ON AN EXCHANGE BASIS, or a surcharge will apply.