Description
CONTACT US TO BUY THIS
A fully spherical jointed front suspension kit to fit the Citroen C2 to S1600/Maxi width.
This kit has a strengthened and refurbished subframe along with re-positioned rear compression strut clevises to aid strength. The wishbones are fabricated from CDS tube and are designed with race and rally in mind.
We use refurbished 406 hubs along with new bearings, and they have revised rollcentre and bump steer correction via rod end spacers.
The track rod ends are spherical jointed with the supplied adaption tubes.
Caster and camber is adjustable.
The 406 hub takes a slot-in 406/306/206 type strut body rather than the clevis type, therefore different strut bodies will be required. We can supply Satchell engineering strut bodies with GPA Bilstein inverted inserts, springs, top mounts, and top mount weld in plates for an extra cost.
Please note –
– The brake offset is slightly different from OE on the 406 hub, it will be necessary to make some adjustments to your brake fitment.
– There is no provision to run the front ARB with this set-up.
THE FRONT SUBFRAME IS SUPPLIED ON AN EXCHANGE BASIS, or a surcharge will apply.
